23:09 |
<Asure>: http://www.powerguru.org/wordpress/wp-content/uploads/2012/07/Pulse-pattern.jpg |
23:09 |
<Asure>: forget all the other symbols and stuff on this picture.. |
23:10 |
<Asure>: Bottom line, first part : HIGH and PULSE will be lit if the signal is like this. |
23:10 |
*** coolmod quit (Quit: http://www.mibbit.com ajax IRC Client) |
23:10 |
<Asure>: Bottom line, second part: LOW and PULSE will be lit |
|
|
23:11 |
<Asure>: also the flat line between the pulses is not 0 volt (GND) |
23:12 |
<Asure>: if you put a probe on GND it will be a clean LOW signal. also on +5V it will be a HIGH signal |
Schreibe einen Kommentar